3D Foam Flex


No minimum order is required. No setup fees.

  • Turnaround time is usually 4-5 business days.
  • File format accepted: .AI, .PDF, .PNG, .EPS, .SVG, .TIF, or .PSD.
  • Minimum 300 dpi. Higher dpi is for better color vibrancy and definition.
  • Kindly ensure that your artwork is outlined.
  • Maximum size of the artwork on this would be 10″ wide and 10″ height.
  • In case you need multiple orders shipped together at one shipping charge. Please place them within the same day. 
  • To get orders ready within 24 hrs, please select rush order charge at checkout.
Select file



    100% Satisfaction Guaranteed on all Transfers

    We stand behind the quality of the transfers we print for you. If you are not satisfied, we will reprint with a new or revised file at no additional charge.

    Heat Pressing Instructions.

    Step 1 – Remove Moisture from the Apparel.

    • Set the pressure between Medium to High

    Step 2 – Set your press

    • Temperature – 160-165C
    • Time – 4-5 seconds

    Step 3 – Press to remove moisture

    Step 4 – Check if moisture is removed completely, if not, repeat previous step until done.

    Step 5 – Press the 3D Foam Flex

    • Place the 3D Foam Flex on the apparel
    • Temperature – 160-165C
    • Time – 30 seconds

    Step 6 – Peel Off

    Step 7 – Second Press

    • Press Directly on the transfer without covering it with any layer.
    • Temperature – 160-165C
    • Time – 4-5 seconds

    Enjoy your 3D Foam Flex.

    Please note – The temperature may vary based on apparel, cloth and other conditions. Make sure to test the right temperature and time before proceeding.