No minimum order is required. No setup fees.

Wave goodbye to heat damage with our DTF cool low-heat application with no scorching.

Stronger adhesive that sticks to any fabric, PVC coated or Waterproof, giving you the best and most durable output.

  •  Turnaround time is usually 2-3 business days.
  •  We ship for free for orders over $ 250 on heat transfers in Ontario.
  •  File format accepted: .AI, .PDF, .PNG, .EPS, .SVG, .TIF, or .PSD.
  •  Minimum 300 dpi. Higher dpi is for better color vibrancy and definition.
  • Exact color matching is not provided.
  •  Please make sure of below :
    •  Mention the size of a design file by width and height without the empty space around the design in the artboard.
    •  There are no transparent pixels in the design.
  •  For gang sheets, our maximum printable width is 22.5” and you may go any length.
  • No change would be made to any order 4 hours after placing it.
  • The minimum charge is $ 0.50 per piece. 
  • In case you need mulitple orders shipped together at one shipping charge. Please place them within the same day.  
  • Very Important note: If your artwork doesnt match the size asked to print. We will only go by the width of the artwork. No refunds will be offered for smaller prints. Extra charges applicable for bigger size than paid for. 
  • To get orders ready within 24 hrs, please select rush order charge at checkout. 
  • Your transfers come in a roll. Or we can have them pre cut for $ 0.20 each. 
  • Pricing:  Wholesale : $ 0.35 per sq inch. Retail: $ 0.10 per sq inch.
Select file




    100% Satisfaction Guaranteed on all Transfers

    We stand behind the quality of the transfers we print for you. If you are not satisfied, we will reprint with a new or revised file at no additional charge.

    Wave goodbye to heat damage with our DTF cool low-heat application. Our new tech is designed for those difficult tech materials, allowing you to improve your clothing designs on stuff you previously thought were too difficult.

    DTF cool is perfect for:

    Technical Fabrics
    Performance Wear
    Designer Clothes
    Water-Resistant Products

    With DTF cool by We Must, you can decorate with confidence and always get flawless results.


    Heat Pressing Instructions.

    DTF for PVC Coated and Waterproof Fabrics.

    Instructions to Heat Press

    •  No Pre-Treatment is needed.
    • The temperature of the heat press for( 100% Polyester or any other synthetic fabrics):- 265  to 270 Fahrenheit.
    • Place the transfer at the desired location and cover it with embroidery backing or flexible application pad (available at Stahls’)
    • Press for 20 seconds directly on the transfer on medium pressure.
    • Peel off the transfer paper while it is still warm or 5 seconds after pressing.
    • Press again with embroidery backing or flexible application pad on top of the print for another 5 seconds, to seal the edges.

    DTF Transfers storing instructions: Store dry, cool area. Put them in either ziploc bags or airtight jars to keep the moisture away. These can stay good for a year, provided they stay away from moisture.