Silicone Products
Silicone Raised Prints
These soft, durable, high-end texture prints are made with a raised effect, which gives a sleek and modern 3D appearance.
Turnaround time: 2-3 business days.
We do not accept Gang sheets for this product.
We do not take Rush Orders for this product.
No Minimums
Pantone Match
Artwork and Specifications
Step 1 - Prepare Your Apparel (Moisture Removal):
● Adjust your heat press to medium to high pressure.
● Press the fabric at 300-310°F for 4-5 seconds to remove any moisture.
● Ensure the fabric is clean and smooth by using a lint roller to eliminate debris and wrinkles.
● Repeat if necessary until all moisture is gone.
Step 2 - Position Your Design:
Carefully place your Silicone Raised Print on the fabric in the desired position.
Step 3 - First Press:
● Close the heat press or apply medium to firm pressure with an iron.
● Press at 300-310°F for 15 seconds with 30-40 psi pressure to 300-320° for 20 seconds with 30-40 psi pressure.
● Note: Always perform a test press to determine the correct temperature and time, as settings may vary based on fabric type and equipment.
Step 4 - Peel Off:
Step 5 - Second Press:
● Apply direct pressure on the transfer without any additional layers.
● Heat press at 300-310°F for an additional 5 seconds to ensure maximum adhesion and durability.
Step 6 - Post-Press Care:
● Wait 24 hours before washing.
● For best results and longevity, wash the garment inside out in cold water, use mild detergent, avoid bleach, and tumble dry on low heat.
● Avoid direct heat on the vinyl.
FAQ's
What are Silicone Raised Prints made of?
What types of designs are best for Silicone Prints?
Can I customize the colors of Silicone Prints?
What kind of garments can I use Silicone Prints on?
What is the minimum order quantity for Silicone Prints?
Do I need any special tools to apply Silicone Prints?