Permanent Wall stickers

● Clean the area where you plan to apply the sticker.
● Make sure it's free from dust, dirt, oil, or moisture.
● A lint-free cloth dampened with mild soap and water works well.
● Dry the surface thoroughly.

● Gently peel the sticker from its backing, starting from one edge.
● Take care not to touch the adhesive side too much to avoid leaving fingerprints or reducing stickiness.

● Align and position the sticker over the target area.
● Hold it above the surface before making contact so you can adjust as needed for perfect placement.

● Once satisfied with its position, press down lightly on one edge of the sticker.
● Gradually smooth it over the surface, moving from one side to the other.
● This helps prevent air bubbles from forming under the vinyl.

Use a squeegee, credit card, or your fingers wrapped in a soft cloth to firmly press and smooth the sticker. Start from the center and work outward to push out any air bubbles.

Press down on the edges of the sticker to make sure they are securely adhered, especially for intricate die-cut shapes.

● Allow the sticker adhesive to set for several hours.
● Avoid washing the area or exposing it to heavy moisture immediately after application for best durability.